The IE HPFP upgrade reliably increases the output of the OE fuel system delivering 50% more displacement than the factory unit. This is a popular modification for the MK6 Golf R and MK5 GTI as well as many others. This combination offers fueling support for nearly 600hp at 7500rpm required for many ECU tunes and turbo upgrades. This is a necessity for stage 2 & big turbo FSI cars. This option is for engine builders looking to purchase a complete new pump with the IE HPFP internals installed and ready to run. IE uses only NEW factory pumps for these builds. This method offers the shortest time from purchase to install, as IE ships you out a pump that drops right in place of your factory one.
The high-pressure fuel pump (HPFP) is a cam-driven fuel pump that provides over 1500psi to the direct injection fuel injectors in your engine. As performance modifications are often desired for the 2.0T FSI engines, more fuel is required to support the added horsepower from larger turbos, ECU tunes, and other power-increasing modifications. That makes IE’s pump capable of near 600hp at 7500rpm.
Product Features
- Supports Stage 2 and big turbo upgrades
- 50% displacement over OE HPFP
- Powers up to 600HP and 7500 RPM
- Constant diameter piston for long life
- Nitrided surface finish for exact tolerances
- Extreme resistance to wear and abrasion
- Ultralight titanium retainer eliminates valve float
- Retains OE spring to greatly reduce cam follower wear
- Leak-free molybdenum disulphide impregnated seal
- Every kit is tested and verified before shipment
- Engineered, designed, and manufactured in the USA
Technical Information
Although it is capable of over 350hp at 7000rpm, it does not provide nearly that much in the lower rpm range where most quicker-spooling setups see peak power numbers. This is a great upgrade for those looking to do a big turbo setup, or even max out the factory turbo at higher boost levels. IE’s pump will be perfectly calibrated with any ECU calibration which is tuned for a 9.8MM diameter HPFP piston, which is commonly available.
With rigorous testing behind this product, IE has determined that a consistent diameter piston is absolutely necessary. Many other upgrade kits available use a piston that steps down to a smaller diameter. They do this because it allows them to use the original seal and nut assembly. However, doing this means that less than 1/2 of the cylinder is guiding the pin at the top of the stroke. This greatly increases wear, leakage past the pin, and decreases the stability of the pin riding in the cylinder. Additionally, using a stepped cylinder causes a pumping action on the bottom side of the piston, which pulses fluid against the shaft seal, increasing the possibility for leakage into the cam follower region. With IE’s consistent diameter piston, as with factory design, there is no displacement change occurring on the bottom side of the piston, so there are no pressure pulses against the shaft seal.
From the factory, the OEM HPFP includes a nitrided piston and cylinder. This is done to harden the parts significantly, reducing wear and keeping them within wear tolerances. Nitriding is not a coating, but rather a process in which Nitrogen atoms are infused into the atomic structure of the outer surface of the component. This increases its surface hardness and wear properties drastically. IE has adopted this technology for the IE HPFP as it has proven to be reliable for thousands of miles and cannot chip or flake off like coated components. The thickness and composition of this Nitride layer are independently verified in a materials testing lab for each production batch.
The material IE uses was specifically chosen for its extreme resistance to wear and abrasion. These are critical factors in a system with marginal lubrication provided only by gasoline.
In place of the factory steel spring retainer, the IE HPFP uses an ultra-lightweight titanium retainer. Just like a valve spring and retainer, less weight is better, as it reduces the chance of valve float happening. IE’s retainer was carefully FEA optimized and features a deep weight reduction groove on the outer surface. Other pumps available use an unnecessarily stiffer spring, which puts more pressure on the follower and causes an unnecessary increase in cam follower wear.
The IE HPFP uses a molybdenum disulphide impregnated seal, which increases the stiffness and reduces friction on the seal. Along with this, IE’s custom seals are spring energized to keep them sealing throughout their life with no concern of wearing and leaking. Many of the other HPFP kits on the market reuse the factory seal, which can easily be damaged when the internals are installed. That often causes fuel to leak past the seal and into the crankcase.
Like a brain surgeon in an operating room, IE takes the assembly of precise components serious.
This is done to break-in all components and as a final quality control step. IE’s custom-built dyno is fitted with a motor to drive the pump exactly as if it were installed on a running FSI engine!
These pumps are manufactured in-house, right here in Salt Lake City. Once the components are made, they go through a very strict quality control process before heading over to IE’s clean room for assembly.
- Increased displacement
- Consistent diameter piston
- Nitrided piston and cylinder
- Proprietary alloy
- Spring and retainer
- Custom seal
- Precise assembly
- Proudly made in the USA
Vehicle Compatibility
What’s Included
- Months from the day of purchase/Unlimited Miles for Rebuild Service and Complete New Pumps
Availability & Shipping
In stock and ships from a US warehouse. Standard Shipping applies to every order — rates are calculated at checkout. Some items may require additional processing time depending on the specific product and current demand. Track your order any time at eurospeed.co/pages/track for a live delivery estimate.
International orders ship via Economy International, with delivery typically 6–18 business days depending on destination and customs.
Delivery time depends on the product. Most in-stock parts ship within days, while carbon fiber and made-to-order items may require production time before they ship. For the specific timeline on any item, check the Availability & Shipping section on that product’s own page — the guide below covers our general shipping types.
Shipping Overview
Depending on the item, free air freight may be available for select carbon fiber components, with estimated shipping around 1–2 weeks after dispatch. Larger hoods, oversized body components, and certain made-to-order items may require sea freight and longer delivery windows. If timing is important, please contact us at support@eurospeed.co before placing your order.
Shipping Coverage
EuroSpeed ships to customers across the United States and internationally. Shipping is included in the price of eligible products for your convenience and covers the initial cost of delivery to your destination.
Import duties, taxes, clearance fees, or customs charges required by your destination country are not included and remain the recipient’s responsibility.
Order Processing & Fulfillment
Every order is reviewed, processed, and prepared before shipment. Most in-stock products are processed within 1–3 business days, though some orders may take up to 5 business days depending on fulfillment location, product type, order volume, or courier pickup timing.
EuroSpeed stocks select high-demand products at our U.S. facility and international fulfillment centers. Because our catalog includes many vehicle-specific and specialty parts, not every product is held in-house at all times.
Some orders may ship through our trusted fulfillment network, which may include verified manufacturing partners, authorized distributors, regional warehouses, and international fulfillment centers.
- Orders may ship from a U.S. warehouse, international warehouse, manufacturer, or authorized fulfillment partner.
- Some products may require additional handling, processing, production, or quality-check time before shipment.
- Orders enter fulfillment shortly after being placed and may no longer be eligible for cancellation once processing, production, or shipment preparation begins.
Custom, Made-To-Order & Oversized Items
Custom, made-to-order, and oversized product categories may include carbon fiber steering wheels, hoods, trunk lids, fenders, front lips, splitters, side skirts, diffusers, bumpers, body kits, widebody components, select spoilers, rear wings, and other large carbon fiber components.
Many carbon fiber items are made to order. Some products may already be stocked and ready to dispatch when available, but if inventory is unavailable, your purchase reserves the next available production slot instead of waiting for a separate restock listing.
Production time: Production can take 1–4 weeks depending on product type, selected options, finish, current queue, and quality-control timing.
Shipping time: Shipping can take 2–10 weeks depending on item size, freight method, destination, customs processing, carrier delays, warehouse transfers, and final delivery location. Carbon fiber steering wheels typically ship faster, with shipping usually taking 3–7 business days after dispatch.
By purchasing custom, made-to-order, or oversized items, you acknowledge and accept the extended production, fulfillment, and shipping timelines associated with these products.
Tracking Updates & Delays
All orders receive a tracking number once generated by the courier. Tracking may take 2–3 business days after dispatch to show movement in the courier’s system.
Certain international, oversized, or freight shipments may show limited updates during transfer between fulfillment locations, warehouses, customs, or final-mile carriers. In some cases, tracking is provided or begins updating once the item reaches a regional warehouse, local carrier, or final delivery network.
Shipping timelines are estimates and are not guaranteed. Delays caused by high order volume, weather conditions, customs inspections, carrier disruptions, production queues, warehouse transfers, holidays, or other external factors may occur and are outside of EuroSpeed’s direct control. These delays do not qualify for cancellations or refunds unless the carrier officially marks the package as lost.
Delivery Responsibility
Upon delivery, carefully inspect the item for visible defects or damage before signing for it. If the item is damaged or not as expected, do not accept the package. Once a damaged or defective product is accepted, EuroSpeed cannot cover return shipping costs.
EuroSpeed is not liable for packages marked as delivered by the carrier. If a package is lost, stolen, or missing after being marked as delivered, the customer must file a claim directly with the shipping carrier. Our team will assist with available documentation when needed.
Shipping addresses typically cannot be changed once an order has been marked as shipped. If an address change is possible through the carrier, any carrier redirect, correction, or address-change fee will be the customer’s responsibility.
Please ensure your shipping address is entered correctly at checkout. Orders shipped to incorrectly provided addresses are the customer’s responsibility. EuroSpeed is not responsible for failed deliveries, additional shipping costs, lost packages, or refunds caused by incorrect shipping information, failure to accept delivery, or failure to collect a package from the post office or carrier pickup location within the required time frame.
Customs, Duties & Import Fees
EuroSpeed’s free shipping policy does not include import fees, taxes, duties, clearance charges, or other fees required by your destination country. These charges are the responsibility of the recipient, and EuroSpeed is not responsible for any duties or taxes requested by local customs.
Most shipments clear customs automatically through the shipping provider. However, if additional information is needed to complete the process, our team will assist where possible to help ensure a smooth resolution.
If customs clearance fails and the item is returned or destroyed:
- EuroSpeed reserves the right to deny refund claims.
- Returned items may incur return shipping fees, which will be deducted from any eligible refund.
- Items deemed too costly to return may be destroyed, and no refund will be issued if this occurs.
Package Protection
For added peace of mind, EuroSpeed offers ShipInsure package protection as an optional service at checkout. When selected, this service provides coverage for lost or damaged packages. EuroSpeed is not responsible for shipping delays, lost packages, or damaged items if purchase protection is not selected during checkout.
- Protects against lost or damaged packages.
- Must be selected at checkout.
- Not all oversized body kit purchases are eligible. Please contact us before ordering if custom insurance arrangements are needed.
To file a claim, please visit our Claims Center.
- Claims must be filed within 14 days of delivery.
- Packages stuck in transit for 14 days are considered lost.
- Damage claims typically require photo evidence.
- A 2-day buffer after delivery may apply before lost or stolen claims can proceed.
- Police reports may be required for orders over $500 or where fraud is suspected.
- “Damaged” means the item is broken and unusable.
Questions?
For questions about your order, shipping timeline, customs clearance, or delivery status, please contact our team at support@eurospeed.co. We’re here to help.
Product Installation & Use Disclaimer
EuroSpeed is not liable for any damages, injuries, fitment issues, installation issues, or vehicle-related problems resulting from the installation, modification, misuse, or use of our products.
Products should be installed carefully and used only as intended. For complex installations, electrical components, performance parts, body components, or products requiring modification, professional installation is recommended to help ensure proper fitment, function, and safety.
Any damage caused by improper installation, misuse, modification, or failure to follow installation requirements is the sole responsibility of the customer. By purchasing, installing, or using this product, you acknowledge and accept all associated risks.
Integrated Engineering High Pressure Fuel Pump for Audi A3 8P / B7 A4 / S5 B8 / MK2 TT / MK2 TTS, Volkswagen B6 Passat & More
Latest products
Sale
Carbon Fiber M-Style Mirror Caps for Audi A3 / S3 / RS3 8V (2014-2020)
Fits Audi A3 (2014-2020)+2
Sale
Carbon Fiber Magnetic LED Paddle Shifter for Audi A1/A3/A5/Q3/Q5/Q7/Q8/S3/RS3 & More
Fits Audi A1/A3/A5/Q3/Q5/Q7/Q8/S3/RS3 & More
Sale
Carbon Fiber Mirror Caps for Audi A3 / S3 / RS3 8V (2014-2020)
Fits Audi A3 (2014-2020)+2
Sale
Carbon Fiber Steering Wheel for Audi A3 / S3 / RS3 8V Facelift, A4 / S4 B9, A5 / S5 B9
Fits Audi A3 / S3 / RS3 8V Facelift+2
Sale
Carbon Fiber Steering Wheel for Audi A3 / S3 8V, A4 / S4 B8.5, A5 / S5, A6 / A7 C7
Fits Audi A3 / S3 8V+3
Sale
Carbon Fiber Steering Wheel for Audi A3/S3/RS3 8P, A4/S4 B7, A5/S5 B8 (2006-2011)
Fits Audi A3/S3/RS3 8P (2006-2011)+2
Sale
Carbon Fiber Steering Wheel for Audi A3/S3/RS3 8Y, A4/S4, A5/S5 B9.5 (2021-2024)
Fits Audi A3/S3/RS3 8Y (2021-2024)+2