The APR High Pressure Fuel Pump (HPFP) increases maximum volume of fuel the HPFP can deliver by 37% over stock! In doing so, the direct injection fueling system is capable of satisfying fueling requirements set forth by high horsepower setups. This is accomplished by increasing the displacement of the pump using high quality components to exacting tolerances.
How the direct injection system works:
Overview
A low pressure fuel pump (LPFP) in the fuel tank delivers fuel to the high pressure fuel pump (HPFP) at roughly 4 to 6 bar. Fuel pressure is then bumped up to a maximum of 200 bar, depending on factory parts, with the HPFP. Finally, high pressure fuel is delivered to the injectors, which spray directly into the cylinders.
The problem:
The volume of fuel the HPFP pump can displace is directly tied to the displacement of the pump (Internal bore size, and camshaft dictated stroke), and engine speed. The pump is driven off of a lobe on the camshaft. Larger turbocharger systems, and ethanol usage are capable of taxing this system, especially in the mid to lower RPM range where fuel volume is lower.
The APR solution:
We dramatically increase the volume of fuel the HPFP can displace at every RPM by increasing the displacement of the HPFP. This is accomplished by increasing the bore diameter of the pump’s internal pressurizing cylinder. It’s important to understand, despite the name, a HPFP upgrade is not necessary designed to increase the engine’s fuel rail pressure. The primary goal is to increase the volume of fuel available, which will keep fuel pressure steady even in the most demanding of situations!
High quality components and extreme tolerances:
The HPFP internals must be machined to extreme tolerances and installed in a clean environment or the pump can easily fail. Dimensional tolerances on the APR HPFP are as tight as .00004" and geometric tolerances are as tight as .00005". The plunger and barrel are created from certified and heat-treated bearing-grade stainless steel and the plunger undergoes a special diamond like coating process for exceptional surfaces hardness and ultra-reliable operation. To prevent float associated with altering the plunger’s mass, APR supplies each unit with a properly specified spring. All necessary internal seals are replaced.
Internal testing:
All APR HPFPs are assembled in house under strict assembly guidelines. Each pump is then tested on our test rig to ensure the pumps operate as designed. This step is important for several reasons. It’s critical in determining if a pump has a failure from incorrect install, a leaking seal, or a bad solenoid. Secondly, a seized pump on the vehicle at startup can cause damage to the engine’s camshaft. By testing each pump, we all but eliminate these possibility.
Proven track record:
APR pioneered HPFP upgrades in the early days of VAG direct injection engines. Soon after, APR became an OEM supplier of HPFP and GDI components to VAG for use in various race cars, racing series, project cars, and concept vehicles. The APR HPFP has been at the center of countless motorsport victories across the globe and has operated with a nearly perfect tract record since the program’s motorsport backed inception in 2006. With tens of thousands of pumps sold, APR has a wealth of knowledge, and manufacturing expertise necessary to deliver a product that will and has stood the test of time.
OEM Components:
Critical to the design of the APR HPFP is the use of only genuine Hitachi components, made in Germany, which consists of sensors, pump bodies, and other critical components that must operate with OEM levels of reliability. All APR components are made in the USA using medical grade precision machinery.
Pump rebuilds are applicable to the Hitachi Gen III pump found on the 1.4T, 1.8T EA888 Gen 3, and 2.0T EA888 Gen 3 MQB.
Features
- Dramatically increases the volume of fuel displaced by the HPFP by 37%
- Maintains higher pressures under demanding situations
- Fully rebuilt in house
- Fully machine tested and broken in before shipping
- Rebuild of your existing pump
- Upgraded and weight matched spring
- Titanium retainer
- DLC coated piston
- Heat-treated bearing-grade stainless steel material
- .00004" dimensional tolerances
- .00005" geometrical tolerances
Specifications
Fitment Notes
To purchase this product you must fill out this order form before sending in your pump.
Please note, this is an upgrade of your existing pump and requires sending a pump to APR to be rebuilt. The pump and solenoids must be in working order. We will test the solenoids and visually inspect the pump. Failure to package the pump properly can easily result in damage to the pump’s solenoid connectors.
Emissions Legality
Emission code 7. This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.
Vehicle Compatibility
What’s Included
- 1x APR High Pressure Fuel Pump
Availability & Shipping
In stock and ships from a US warehouse. Standard Shipping applies to every order — rates are calculated at checkout. Some items may require additional processing time depending on the specific product and current demand. Track your order any time at eurospeed.co/pages/track for a live delivery estimate.
International orders ship via Economy International, with delivery typically 6–18 business days depending on destination and customs.
Delivery time depends on the product. Most in-stock parts ship within days, while carbon fiber and made-to-order items may require production time before they ship. For the specific timeline on any item, check the Availability & Shipping section on that product’s own page — the guide below covers our general shipping types.
Shipping Overview
Depending on the item, free air freight may be available for select carbon fiber components, with estimated shipping around 1–2 weeks after dispatch. Larger hoods, oversized body components, and certain made-to-order items may require sea freight and longer delivery windows. If timing is important, please contact us at support@eurospeed.co before placing your order.
Shipping Coverage
EuroSpeed ships to customers across the United States and internationally. Shipping is included in the price of eligible products for your convenience and covers the initial cost of delivery to your destination.
Import duties, taxes, clearance fees, or customs charges required by your destination country are not included and remain the recipient’s responsibility.
Order Processing & Fulfillment
Every order is reviewed, processed, and prepared before shipment. Most in-stock products are processed within 1–3 business days, though some orders may take up to 5 business days depending on fulfillment location, product type, order volume, or courier pickup timing.
EuroSpeed stocks select high-demand products at our U.S. facility and international fulfillment centers. Because our catalog includes many vehicle-specific and specialty parts, not every product is held in-house at all times.
Some orders may ship through our trusted fulfillment network, which may include verified manufacturing partners, authorized distributors, regional warehouses, and international fulfillment centers.
- Orders may ship from a U.S. warehouse, international warehouse, manufacturer, or authorized fulfillment partner.
- Some products may require additional handling, processing, production, or quality-check time before shipment.
- Orders enter fulfillment shortly after being placed and may no longer be eligible for cancellation once processing, production, or shipment preparation begins.
Custom, Made-To-Order & Oversized Items
Custom, made-to-order, and oversized product categories may include carbon fiber steering wheels, hoods, trunk lids, fenders, front lips, splitters, side skirts, diffusers, bumpers, body kits, widebody components, select spoilers, rear wings, and other large carbon fiber components.
Many carbon fiber items are made to order. Some products may already be stocked and ready to dispatch when available, but if inventory is unavailable, your purchase reserves the next available production slot instead of waiting for a separate restock listing.
Production time: Production can take 1–4 weeks depending on product type, selected options, finish, current queue, and quality-control timing.
Shipping time: Shipping can take 2–10 weeks depending on item size, freight method, destination, customs processing, carrier delays, warehouse transfers, and final delivery location. Carbon fiber steering wheels typically ship faster, with shipping usually taking 3–7 business days after dispatch.
By purchasing custom, made-to-order, or oversized items, you acknowledge and accept the extended production, fulfillment, and shipping timelines associated with these products.
Tracking Updates & Delays
All orders receive a tracking number once generated by the courier. Tracking may take 2–3 business days after dispatch to show movement in the courier’s system.
Certain international, oversized, or freight shipments may show limited updates during transfer between fulfillment locations, warehouses, customs, or final-mile carriers. In some cases, tracking is provided or begins updating once the item reaches a regional warehouse, local carrier, or final delivery network.
Shipping timelines are estimates and are not guaranteed. Delays caused by high order volume, weather conditions, customs inspections, carrier disruptions, production queues, warehouse transfers, holidays, or other external factors may occur and are outside of EuroSpeed’s direct control. These delays do not qualify for cancellations or refunds unless the carrier officially marks the package as lost.
Delivery Responsibility
Upon delivery, carefully inspect the item for visible defects or damage before signing for it. If the item is damaged or not as expected, do not accept the package. Once a damaged or defective product is accepted, EuroSpeed cannot cover return shipping costs.
EuroSpeed is not liable for packages marked as delivered by the carrier. If a package is lost, stolen, or missing after being marked as delivered, the customer must file a claim directly with the shipping carrier. Our team will assist with available documentation when needed.
Shipping addresses typically cannot be changed once an order has been marked as shipped. If an address change is possible through the carrier, any carrier redirect, correction, or address-change fee will be the customer’s responsibility.
Please ensure your shipping address is entered correctly at checkout. Orders shipped to incorrectly provided addresses are the customer’s responsibility. EuroSpeed is not responsible for failed deliveries, additional shipping costs, lost packages, or refunds caused by incorrect shipping information, failure to accept delivery, or failure to collect a package from the post office or carrier pickup location within the required time frame.
Customs, Duties & Import Fees
EuroSpeed’s free shipping policy does not include import fees, taxes, duties, clearance charges, or other fees required by your destination country. These charges are the responsibility of the recipient, and EuroSpeed is not responsible for any duties or taxes requested by local customs.
Most shipments clear customs automatically through the shipping provider. However, if additional information is needed to complete the process, our team will assist where possible to help ensure a smooth resolution.
If customs clearance fails and the item is returned or destroyed:
- EuroSpeed reserves the right to deny refund claims.
- Returned items may incur return shipping fees, which will be deducted from any eligible refund.
- Items deemed too costly to return may be destroyed, and no refund will be issued if this occurs.
Package Protection
For added peace of mind, EuroSpeed offers ShipInsure package protection as an optional service at checkout. When selected, this service provides coverage for lost or damaged packages. EuroSpeed is not responsible for shipping delays, lost packages, or damaged items if purchase protection is not selected during checkout.
- Protects against lost or damaged packages.
- Must be selected at checkout.
- Not all oversized body kit purchases are eligible. Please contact us before ordering if custom insurance arrangements are needed.
To file a claim, please visit our Claims Center.
- Claims must be filed within 14 days of delivery.
- Packages stuck in transit for 14 days are considered lost.
- Damage claims typically require photo evidence.
- A 2-day buffer after delivery may apply before lost or stolen claims can proceed.
- Police reports may be required for orders over $500 or where fraud is suspected.
- “Damaged” means the item is broken and unusable.
Questions?
For questions about your order, shipping timeline, customs clearance, or delivery status, please contact our team at support@eurospeed.co. We’re here to help.
Product Installation & Use Disclaimer
EuroSpeed is not liable for any damages, injuries, fitment issues, installation issues, or vehicle-related problems resulting from the installation, modification, misuse, or use of our products.
Products should be installed carefully and used only as intended. For complex installations, electrical components, performance parts, body components, or products requiring modification, professional installation is recommended to help ensure proper fitment, function, and safety.
Any damage caused by improper installation, misuse, modification, or failure to follow installation requirements is the sole responsibility of the customer. By purchasing, installing, or using this product, you acknowledge and accept all associated risks.
APR High Pressure Fuel Pump for Audi A3 8V / S3 8V / F3 Q3 / MK3 TT / MK3 TTS, Volkswagen MK1 Arteon & More
Latest products
Carbon Fiber M-Style Mirror Caps for Audi A3 / S3 / RS3 8V (2014-2020)
Fits Audi A3 (2014-2020)+2
$199.99
Carbon Fiber Magnetic LED Paddle Shifter for Audi A1/A3/A5/Q3/Q5/Q7/Q8/S3/RS3 & More
Fits Audi A1/A3/A5/Q3/Q5/Q7/Q8/S3/RS3 & More
$379.99
Carbon Fiber Steering Wheel for Audi A3 / S3 / RS3 8V Facelift, A4 / S4 B9, A5 / S5 B9
Fits Audi A3 / S3 / RS3 8V Facelift+2
$599.99
Carbon Fiber Steering Wheel for Audi A3 / S3 8V, A4 / S4 B8.5, A5 / S5, A6 / A7 C7
Fits Audi A3 / S3 8V+3
$599.99
Carbon Fiber Steering Wheel for Audi A3/S3/RS3 8P, A4/S4 B7, A5/S5 B8 (2006-2011)
Fits Audi A3/S3/RS3 8P (2006-2011)+2
$699.99
Carbon Fiber Steering Wheel for Audi A3/S3/RS3 8Y, A4/S4, A5/S5 B9.5 (2021-2024)
Fits Audi A3/S3/RS3 8Y (2021-2024)+2
$699.99